IP100FS
The controller redirects traffic to the specified terminals.
- Simultaneous conversation listening function for Full-Duplex communication
- Call features
- Seamless Roaming
Basic functions
The IP communication terminal IP100H transmits voice and pre-programmed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN).
The controller redirects traffic to the specified terminals.
The IP100FS WLAN transceiver application can create a virtual transceiver and a simple sending station on a Windows PC.
The IP100FS can obtain location information (based on the use of access points) and status information of each terminal.
Simultaneous conversation listening function for Full-Duplex communication
With an optional headset (HM-153LS, or HM-166LS) or headset (HS-102 with OPC-2359), the simultaneous talk function provides full two-way one-to-many communication, which users can talk and receive at the same time as a telephone conversation.
Call features
The IP100H/IP100FS can make individual calls, group conference calls, all calls and area calls.
The unique area dial feature allows you to call any user who has access to the designated access point.
Mix Mode
The mix mode receives multiple user voices simultaneously. One-to-many communication is possible and the efficiency of information exchange is increased.
Seamless Roaming
If two or more wireless access points are deployed in an IP network, the IP100H can access the nearest access point and roam between the access points.
Status and short data messages
The IP100H/IP100FS can send status messages and brief data* to other users.
* IP100H can only send pre-programmed messages.
Scalable system
Deplying wireless access points in an IP network can extend the communication range. Scattered sites can also be connected via an IP network (VPN). The range is only limited by your IP network coverage.
High security
Wireless LAN security protocols (WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)) encrypt your private conversations.
Without permission
No licenses or apps required for installation. IEEE 802.11 a/b/g/n standards are used.
Easy maintenance
The IP1000C programs almost all terminal configurations over the air. No individual computer programming required via cable connection.
IP100FS<WLAN transceiver APPLICATION>
The IP100FS can communicate with IP communication terminals from a PC.
The IP100FS can obtain location information for each IP100H based on the access point in use.
It can be installed on a Windows® tablet PC as well as a laptop.
- USB STICK

IP100FS
REMOTE COMMUNICATOR
Windows remote communicator for compatible Icom IP communication systems.
Windows remote communicator for compatible Icom IP communication systems.
Features
PC-based communication
Communicates with supported IP terminals from a Windows PC.
Wi-Fi location information
Can identify the access point used by a Wi-Fi radio such as the IP110H.
Remote management
Supports remote lock management from the PC.
Specifications
Specifications(System requirements)
| Operating system |
Microsoft® Windows ™ 11 |
|---|---|
| CPU | Intel® Core™ 2 Duo Processor E6600/2.4GHz or better |
| Memory | 2GB or higher |
| Hard disk space | 1GB of disk space (to save log files) |
| Audio | DirectSound compatible audio (Frequency response up to 20kHz, sampling rate 48kHz) |
| Display resolution | 1920×1080 pixel recommended 1024×768 pixel minimum |
| Other | USB 2.0 port, 10Mbps or faster Ethernet interface, speaker, microphone or headset |
Optional Accessories
IP110H
Wi-Fi Transceiver

HM-152
HAND MICROPHONE

SM-26
DESKTOP MICROPHONE

BC-147S
AC ADAPTER

CT-23
PTT MICROPHONE ADAPTOR
Archived accessories / European availability restrictions
- IP100H/IP100FS/IP1000C — Discontinued product



