IC-FR5300/FR6300
Completely New CPU/FPGA Platform
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation
Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN
IP Remote Maintenance
IC-FR5300/IC-FR6300 NXDN Version
Completely New CPU/FPGA Platform
The IC-FR5300 series is the second generation IDAS™ Repeater, keeping system compatibility with the original IC-FR5000 series and continuing its unique package.
It looks the same as the IC-FR5000, but a new CPU/FPGA platform is used.
The IC-FR5300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna.
System Scalability
The IC-FR5300 series can be easily upgraded by installing an optional UC-FR5300 Network/controller board and software provided with a CF card.
Depending on the communication density and coverage, your radio system can grow from a single site to a simulcast system or multi-site trunking* system, to match your communication needs.
* Compatible IDAS radio terminals are required for multi-site trunking.
D-SUB 25-Pin Accessory Connector
The IC-FR5300 series has a programmable D-SUB 25-pin accessory connector for connecting an external remote control devices.
Also, modulation/demodulation signals can be input/output from the D-SUB connector.
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*
Employing a high performance power amplifier, the IC-FR5300 series provides a reliable 100% duty cycle operation at 25W output.
When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* 25 W output power depending on the repeater version. Ambient temperature: 25°C
50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*
When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
Capable of Installing Two RF modules in One Chassis
The IC-FR5300 series has an internal space for installing another RF unit.
Two RF modules* can be installed and operated independently.
LEDs on the front panel shows the status of both channel.
* Optional UR-FR5300/UR-FR6300 required.
Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN
The IC-FR5300 series can receive both analong and digital modes on a channel, and transmit either mode, depending on the programming.
It decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit alphanumeric display, 5 programmable buttons, 32 memory channels and internal speaker enable you to use the repeater as a simple base station, or to check repeater activity.
The LCD shows a variety of text and code information.
IP Remote Maintenance
When the IC-FR5300 series is connected to an IP network through the optional UC-FR5300 network/controller board, PC programming and IP address setting can be made from a remote location.
The SNMP traps and Syslog can be sent to your manager for remote monitoring.
Made in Japan Quality and reliability
All Icom products are checked to pass rigorous internal testing as well as environmental testing at the Wakayama Icom factory before shipment. Our world leading products and quality is a tradition.
Other Features
- 19-inch rack mount 2U height low profile
- Receiver voting function improves talkback capability of radio terminals in the field
- RC-FS10 remote communicator software works as a simple dispatch station to communicate with radio terminals through the repeater
- CW ID transmitter
- PTT priority setting (Local Microphone, external PTT or repeater operation)
- 5-Tone decoder* (* For analog mode only)
- DTMF encoder/decoder
- Low voltage alert

IC-FR5300/IC-FR6300 (NXDN)
VHF AND UHF DIGITAL REPEATERS
Scalable NXDN digital repeater
IC-FR5300/IC-FR6300: Provides space for a second optional RF module operating independently.
Supplied accessories may differ or may not be supplied, depending on version.
Features
Two RF modules in one chassis
Provides space for a second optional RF module operating independently.
25 W continuous-duty operation
Supports 100% duty-cycle operation at 25 W under Icom conditions.
Scalable infrastructure
An optional UC-FR5300 board and appropriate software add network functions.
Digital and analogue repeating
Mixed digital/analogue operation and 32 memory channels.
Specifications
| Frequency coverage | VHF EUR: 136–174 MHz · UHF EUR: 400–470 MHz |
|---|---|
| RF output power | EUR: 25 / 10 / 5.8 W |
| Channels / zones | 32 / 1 |
| Operating modes | NXDN / analogue FM |
| Dimensions | IC-FR5300/IC-FR6300 · 483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in |
| Weight, approximate | IC-FR5300/IC-FR6300 · 5.78 kg, 12.7 lb |
| Operating temperature | −25 to +55 °C (EUR/AUS) |
| Power supply | 13.2 V DC (EUR) |
Specifications refer to the version identified above and are subject to change by ICOM.
Supplied Accessories
No separate list is specified on the official page. Contents depend on the version and package.
Optional Accessories

HM-152
HAND MICROPHONE

SM-26
DESKTOP MICROPHONE

SP-35
External Speaker

SP-35L
External Speaker

CF-FR5000MC
Multi-site Conventional Software

CF-FR5000MT
Multi-site Trunking Software

CF-FR5300SC
SIMULCAST SOFTWARE

UR-FR5300
CHANNEL MODULE

UR-FR6300
CHANNEL MODULE

UX-241
GNSS ANTENNA

UC-FR5300
NETWORK/CONTROLLER BOARD
Select optional accessories for the transceiver version and follow ICOM connection instructions.
Support / Download
Official ICOM documents in their original languages. Declarations of Conformity remain unchanged.
Catalogs / Brochures
Brochure — IC-FR5300/IC-FR6300
Open PDF ›Instruction Manuals / Guides
Instruction Manual — IC-FR5300/IC-FR6300
Open PDF ›Certifications and Declarations
Declaration of Conformity — IC-FR5300/UR-FR5300
Open PDF ›Declaration of Conformity — IC-FR6300/UR-FR6300
Open PDF ›











